Changelog¶
1.2.4 - May 7, 2024¶
New¶
Added cross-match plan
1.1.3
forsdss_dr17_specobj
1.2.3 - May 2, 2024¶
New¶
Added cross-match plan
1.1.2
formarvels_dr12_star
1.2.2 - April 30, 2024¶
Improved¶
Changed some warning to log messages.
Fixed¶
Removed leftover print message.
1.2.1 - April 25, 2024¶
New¶
Added cross-match plan
1.1.1
formarvels_dr11_star
.A few additional improvements to the
XMatchPlanner
code.
1.2.0 - April 23, 2024¶
Improved¶
This version makes several improvements to XMatch
:
*Removes some hard-coded use of SQL files. These should not be necessary and if they were, we should get to the bottom of why they are …
*Store intermediate results in a sandboxed
catalog_to_XXX
table. This allows to run a full dry-run cross-match for a single catalogue.*Phase 1: distinct only on
model_pk
.*Phase 3: Require using only best matches.
Additionally, this version adds the too
carton.
1.1.1 - October 13, 2023¶
Fixed¶
mwm_rv.py: mwm_bin_rv_short_rgb_apogee: remove downsampling.
Update target_selection.yml for target_selection_plan 1.0.51.
1.1.0 - September 28, 2023¶
New¶
Added support in the cross-match code to run “addendum” cross-match runs.
Configuration for cross-match run 1.1.0.
1.0.50 - August 20, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.50 cartons
1.0.49 - August 17, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.49 cartons
1.0.48 - August 8, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.48 cartons
1.0.47 - August 3, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.47 cartons
1.0.46 - August 2, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.46 manual cartons
1.0.45 - July 31, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.45
1.0.44 - July 28, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.44
1.0.43 - July 26, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.43
1.0.42 - July 24, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.42
1.0.41 - July 23, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.41
Update mwm_cb_, mwm_bin_vis carton names + priorities
1.0.40 - July 21, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.40
Update mwm_erosita_* carton names + priorities
1.0.39 - July 20, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.39
Update mwm_bin_rv*, mwm_ob*, mwm_halo* cartons
1.0.38 - July 12, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.38
1.0.37 - July 7, 2023¶
Fixed¶
Modify several BHM (+MWM-eROSITA) cadences to be ‘flexible’ equivalents.
Adjust method by which AQMES cartons aquire cadence choices
Update target_selection.yml for plan 1.0.37
1.0.36 - July 4, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.36
change priority for mwm_ob_core and mwm_ob_cepheids¶
1.0.35 - July 2, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.35 manual cartons
1.0.34 - June 30, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.34 cartons
add cartons: mwm_bin_rv_short_mdwarf, mwm_bin_rv_short_subgiant, mwm_bin_rv_short_rgb
remove carton mwm_bin_rv_short
1.0.33 - June 14, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.33 cartons
Add mwm_yso_*_single cartons
1.0.32 - June 1, 2023¶
Fixed¶
Rerun
mwm_magcloud_agb_apogee
,mwm_magcloud_rgb_boss
,mwm_cb_galex_vol
,mwm_cb_xmmom
, andmwm_cb_swiftuvot
.
1.0.31 - May 23, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.31 cartons
1.0.30 - May 21, 2023¶
Fixed¶
Rerun
mwm_cb_galex_vol
,mwm_cb_xmmom
, andmwm_cb_swiftuvot
.
1.0.29 - May 18, 2023¶
Fixed¶
Rerun
ops_std_boss_ps1dr2
.
1.0.28 - May 16, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.28 cartons
1.0.27 - May 9, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.27 cartons
1.0.26 - May 8, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.26 cartons
1.0.25 - May 8, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.25 cartons
1.0.24 - May 7, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.24 cartons
1.0.23 - May 6, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.23 cartons
1.0.22 - May 5, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.22 cartons
1.0.21 - May 2, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.21 cartons
1.0.20 - May 2, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.20 cartons
1.0.19 - April 26, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.19 cartons
1.0.18 - April 17, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.18 cartons
1.0.17 - April 15, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.17 cartons
1.0.16 - April 9, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.16 cartons
1.0.15 - April 8, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.15 cartons
1.0.14 - April 7, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.14 cartons
1.0.13 - April 6, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.13 cartons
1.0.12 - April 3, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.12 cartons
1.0.11 - March 31, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.11 cartons
1.0.10 - March 28, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.10 for manual cartons
1.0.9 - March 28, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.9 cartons
1.0.8 - March 17, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.8 cartons
1.0.7 - March 13, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.7 for manual cartons
1.0.6 - March 10, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.6 cartons
1.0.5 - March 9, 2023¶
Fixed¶
Update target_selection.yml for plan 1.0.5 cartons
Updated code for gaia dr3 XP synthetic magnitudes
1.0.4 - March 4, 2023¶
Fixed¶
Use gaia dr3 XP synthetic mags as supplier of griz for targets
1.0.3 - February 10, 2023¶
Fixed¶
Update for manual cartons can_offset
1.0.2 - February 8, 2023¶
Fixed¶
Update tools.py for manual cartons for Gaia DR3
1.0.1 - February 8, 2023¶
Fixed¶
Update mwm_yso cartons for v1.0
1.0.0 - February 6, 2023¶
🚀 New¶
This tag includes the full code used for the cross-match for v1. Target selection code for v1 cartons is not complete as of this tag.
0.3.23 - November 15, 2022¶
✨ Improved¶
Added handling of
can_offset
column for file cartons.
0.3.22 - August 6, 2022¶
🔧 Fixed¶
tools.py: add Gaia_DR3_Source_ID for manual/openfiber FITS file.
0.3.21 - August 4, 2022¶
🔧 Fixed¶
ops_std_apogee: add Gaia proper motion and parallax cut
0.3.20 - July 5, 2022¶
🔧 Fixed¶
ops_std_apogee: remove the condition (TwoMassPSC.j_m - TwoMassPSC.k_m) < 0.5
0.3.19 - May 24, 2022¶
🔧 Fixed¶
tools.py: valid_program: add mwm_validation
0.3.18 - February 11, 2022¶
🔧 Fixed¶
mwm_cb.py: MWM_CB_300_Carton: add condition FUV > -999
The above change affects the below cartons.
mwm_cb_300pc_apogee
mwm_cb_300pc_boss
0.3.17 - February 8, 2022¶
🔧 Fixed¶
Update priority for the below cartons.
mwm_rv_long_fps
mwm_rv_short_fps
0.3.16 - February 2, 2022¶
🔧 Fixed¶
Update priority to 2705 for the below cartons.
mwm_yso_cluster_apogee
mwm_yso_cluster_boss
mwm_yso_cmz_apogee
mwm_yso_disk_apogee
mwm_yso_disk_boss
mwm_yso_embedded_apogee
mwm_yso_nebula_apogee
mwm_yso_variable_apogee
mwm_yso_variable_boss
0.3.15 - January 31, 2022¶
🔧 Fixed¶
Update below carton.
bhm_colr_galaxies_lsdr8
0.3.14 - January 27, 2022¶
🔧 Fixed¶
Update below cartons.
bhm_csc_boss
bhm_csc_apogee
0.3.13 - January 25, 2022¶
🚀 New¶
Update below cartons.
bhm_csc_boss
bhm_csc_apogee
0.3.12 - January 20, 2022¶
🚀 New¶
New open fiber cartons FITS format.
0.3.11 - January 5, 2022¶
🚀 New¶
Add the below new carton.
ops_sky_boss_fallback
Update the priority variable in target_selection.yml for the below carton.
bhm_colr_galaxies_lsdr8
0.3.10 - December 6, 2021¶
🔧 Fixed¶
Update target_selection.yml for the below carton.
mwm_tess_ob
0.3.9 - November 23, 2021¶
🔧 Fixed¶
Change program variable of the below cartons.
ops_sky_apogee_best
ops_sky_apogee_good
ops_sky_boss_best
ops_sky_boss_good
0.3.8 - November 20, 2021¶
🔧 Fixed¶
Change category variable of the below cartons.
ops_sky_apogee_best
ops_sky_apogee_good
ops_sky_boss_best
ops_sky_boss_good
0.3.7 - November 19, 2021¶
🚀 New¶
Add the below new cartons.
ops_sky_apogee_best
ops_sky_apogee_good
ops_sky_boss_best
ops_sky_boss_good
0.3.6 - October 8, 2021¶
🚀 New¶
Add the below new cartons.
ops_tycho2_brightneighbors
ops_2mass_psc_brightneighbors
ops_gaia_brightneighbors
0.3.5 - September 27, 2021¶
🚀 New¶
Add the below cartons to target_selection.yml so they can be rerun.
bhm_aqmes_bonus_bright
bhm_aqmes_bonus_core
bhm_aqmes_bonus_faint
bhm_aqmes_wide2
bhm_aqmes_wide2_faint
mwm_cb_300pc_apogee
mwm_cb_300pc_boss
0.3.4 - September 6, 2021¶
🔧 Fixed¶
0.3.3 - August 27, 2021¶
✨ Improvements¶
Modify get_file_carton() in cartons/tools.py for open fiber cartons.
Modify mwm_erosita_stars, mwm_erosita_compact_gen, and mwm_erosita_compact_var cartons for extra cases in assigning instrument, cadence, priority.
0.3.2 - July 21, 2021¶
🔧 Fixed¶
Changes to address new columns not showing in the model of the carton temporary table.
0.3.1 - July 16, 2021¶
🚀 New¶
Remove lower magnitude limit for mwm_yso, mwm_ob, and mwm_halo cartons for
0.5.0
.
0.3.0 - June 22, 2021¶
🚀 New¶
Full implementation of all cartons for
0.5.0
.Implement method to create a carton from a FITS file (see
get_file_carton
).
0.2.2 - March 29, 2021¶
✨ Improvements¶
Various changes to
xmatch
plan0.5.0
.Xmatch: Run
ANALYZE
on temporary table only when clustering.Xmatch: Exclude reject tables from
extra_nodes
.Xmatch: No need to analyze if phase 3 is skipped.
0.2.1 - March 5, 2021¶
🧹 Cleanup¶
Pin
sdssdb==0.4.8
.
0.2.0 - March 5, 2021¶
🚀 New¶
39 Improvements for cross-match
v0.5
. Implementsrun_id
and catalogid withrun_id
bit shifting, use ofra_orig
anddec_orig
from TIC_v8 whenposflag=gaia2
, reject extended sources when matching against TIC_v8, and several improvements to cross-matching performance.
0.1.4 - January 11, 2021¶
🧹 Cleanup¶
Unpin
healpy
version.
0.1.3 - January 11, 2021¶
🧹 Cleanup¶
Tag for release of
ops_std_boss_tic
. Also includes changes and new cartons in preparation forv0.5
.
0.1.2 - December 9, 2020¶
🚀 New¶
Add Yanny scrapper script.
Add
ops_apogee_stds
carton and 0.1.2 target selection plan.
0.1.1 - November 10, 2020¶
✨ Improvements¶
0.1.0 - August 18, 2020¶
🚀 New¶
Framework for implementing cartons against
catalogdb
and load them intotargetdb
.All the cartons for target selection
v0
.Xmatch: do not apply Q3C in phase 1.
Xmatch: do not disable
seqscan
during phase 3.Xmatch: add several indexes to
Catalog
and the relational tables.XMatch: support weights to determine the join paths.
Xmatch: Fix bug that prevented proper motions to be used in cross-matching.
Xmatch: In phase 2, determine what table is larger and define
q3c_join
accordingly.Code to create
.create_sky_catalogue <sky catalogues>
.
0.1.0-alpha.1 - April 21, 2020¶
🚀 New¶
Basic framework. Cross-matching tools work. Target selection tools still incomplete.